 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C&K LP Series Miniature Snap-in Slide Switches Features/Benefits * 6 to 11 AMPS available * Easy assembly--Snap-in mounting * Contamination resistant--extended actuator * Positive detent * RoHS compliant Typical Applications * Small appliances * Outdoor appliances * Portable tools Models Available Specifications Materials HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled acetal, UV and petroleum resistant, black. CONTACTS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page I-27 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. J Slide CONTACT RATING: Q contact material (LP0X, LP2X Models: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). (LP7X, LP8X Models): 11 AMPS @ 125/250 V AC (UL/CSA). See page I-27 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT RESISTANCE: Below 10 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. OPERATING TEMPERATURE: -30C to +65C STORAGE TEMPERATURE: -30C to +85C NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-25 and J-26. For additional options not shown in catalog, consult Customer Service Center. Switch Function LP22 DPDT, 6 AMP LP02 SPDT, 6 AMP LP81 DPST, 11 AMP LP82 DPDT, 11 AMP Actuator C2 Black cap C1 Whitecap C3 Red cap Detent 1 With detent Mounting Style T2 Snap-in panel with tabs (D, L, N markings only) Terminations 03 Solder lug with hole Housing Markings NONE No markings D ON-OFF Contact Material Q Silver B Gold Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-24 www.ittcannon.com C&K LP Series Miniature Snap-in Slide Switches SWITCH FUNCTION NO. POLES SP MODEL NO. AMP RATING* 6 SWITCH FUNCTION SPDT SCHEMATIC NO. POLES MODEL NO. AMP RATING* SWITCH FUNCTION SCHEMATIC LP02 LP22 6 DPDT LP81 DP All models with all options when ordered with `Q' contact material. 11 DPST Contacts make on side actuator thrown. * For complete contact ratings, see CONTACT MATERIALS Section, page J-26. LP82 11 DPDT J Slide Terminal Nos. For Reference Only Part number shown: LP22C21S203Q ACTUATOR C1; C2; C3 OPTION CODE2 ACTUATOR CAP COLOR BLACK WHITE RED NOTE: Actuator finish: gloss. Other colors available, consult Customer Service Center. C2 C1 C3 DETENT 1 WITH DETENT MOUNTING STYLE T2 SNAP-IN PANEL WITH TABS PANEL MOUNTING DIM. `A' PANEL THICKNESS .030-.045 (0,76) (1,14) .046-.059 (1,17) (1,50) .060-.089 (1,52) (2,26) Mounting style T2 suitable for markings. See HOUSING MARKINGS options. .090-.120 (2,29) (3,05) DIM `A' .578 (14,68) .585 (14,86) .598 (15,19) .610 (15,49) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-25 www.ittcannon.com C&K LP Series Miniature Snap-in Slide Switches TERMINATIONS 03 SOLDER LUG WITH HOLE J Slide NONE NO MARKINGS HOUSING MARKINGS D ON-OFF NOTE: Housing markings are available with `T2' mounting style only. The marking color on all housings with marking options `D' is white, standard. Other marking colors are available, consult Customer Service Center. Orientation of actuator and terminals. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPLIANT CONTACT MATERIAL RATINGS Q YES YES SILVER 2 POWER LP0X, LP2X MODELS: 6 AMPS @ 125 V AC or 28 V DC; 3 AMPS @ 250 V AC (UL/CSA). LP7X, LP8X MODELS: 11 AMPS @ 125/250 V AC (UL/CSA). B YES YES GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @20 V AC OR DC MAX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all when ordered with `Q' contact material. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J-26 www.ittcannon.com |
Price & Availability of LP82C21T203B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |